Project Description

The diamond parting-off grinder DS150 NC is a modern production machine

The diamond wire saw DS150 NC is ideal for the cutting of 2D contours.

Passage (HxW) is 120 x 460 mm, travel work area is 430 x 430 mm (X axis, Y axis)

The diamond wire saw DS150 NC is a diamond parting-off grinder which lends itself ideally for the cutting of 2D contours. The wire unit works horizontal, therefore after cutting the workpiece remains at the starting material, it does not fall off. The linear guidings with recirculation ball bearings are covered by folding bellows. This guarantees a longevity when sawing abrasive materials.
The ball screws used for the feed allow the pre-programmed contour to be followed with high precision. The process of programming the workpiece contour with external CAD programs is supported by such features as automatic tool radius correction, automatic closure of the contour and the graphic display and process simulation.

  • bandtest
YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

The diamond wire saw DS150 NC saws 2D contours in a variety of materials

Weitere technische Details zur Diamantsäge DS150 NC

The workpiece can be processed on two axes with any interpolation. The wire is driven by a four-phase current motor controlled by a frequency transformer. The speed of the wire can be set at any point between 100 and 3000 m/min. To insert and tension the wire, the drive motor and the drive roller are moved with a pneumatic cylinder. The wire tension is set by the adjustable air pressure on the pressure reducer.
The process of programming the workpiece contour with external CAD programs is supported by such features as automatic tool radius correction, automatic closure of the contour and the graphic display and process simulation. Precision in following the contour is ensured by ball screws, which achieve an optimum result in combination with the automatic delay in movement when radii are being processed.

The machine is equipped with glass scales for precise table positioning.

The dust is extracted directly under the work area. The sawdust is pulled down by the wire and then directly extracted.

Technical data Description
Lenght: 1968 mm
Width: 880 – 890 mm
Height: 2600 mm with a use panel
Passage: 120 mm x 460 mm
Work area (X axis, Y axis): 430 mm, 430 mm
Axes of rotation: 150 mm
Sawing wire: Ø 0,7 – 1,2 mm, Length 2100 mm
Wire speed: 100 – 3000 m/min
Drive: Three-phase current motor 750 W
Weight: 600 kg
Zeichnung Diamantdrahtsäge DS150NC Maschine mit Maßen
Dramet-DS150-NC