Project Description

The diamond band saw BS400 is available in the versions F and FY.

The diamond band saw BS400 is a saw with a driven column

Passage (HxW) is 335 x 410 mm, cutting length (X-axis) is 700 mm.

The diamond band saw BS400 in its standard version BS400 F is a machine which is X-direction driven.

When equipped with an NC-driven 2-axis machine, it is available in the version BS400 FY.

Serially the diamond saw is equipped with a spray protection cabin and a display. This comprises a measuring unit to measure the feed force. During cutting, the feed force is displayed on the screen. The feed and band speed can either be manually adjusted or regulated automatically according to the programmable nominal force.

Both dry cutting and cutting with coolant are possible.

  • bandtest

The Diamond band saw BS400 FY cuts various substrates

More technical details concerning the Diamond band saw BS400 FY

The basic version of the BS400 F with moving column is composed of a band unit with two deflection rollers D = 420 mm with a passage (H x W) of 400 x 410 mm. The diamond saw band runs over two rollers in an endless loop. It is driven and pneumatically tensioned by the height-adjustable upper roller. The band is driven by a 2.2 KW three-phase current motor controlled by a frequency transformer. The band tension is set by the adjustable air pressure on the pressure reducer. The speed of the band can be set between 200 and 3000 m/min using the control dial.

The travel of the band unit is program-controlled with a ball screw and the servomotor (X axis). Travel and feed rates are programmable. The band unit can be positioned with the help of buttons. Control: Mitsubishi touch-screen PLC control. The BS400 F is upgraded to the CNC-controlled 2-axis BS400 FY by fitting it with a servomotor-driven Y table.

It can be operated with a dry cut or alternatively with cooling. For dry cutting, a suction unit is attached to the exhaust connector provided. For the stainless version, pure water can be used for cooling.

Technical Data Description
Length: 1700 mm
Width: 1985 mm
Height: 2230 mm
Passage: 335 mm x 410 mm
Travel (X, Y): 700 mm
Deflection roller diameter Ø: 422 mm
Guide roller diameter Ø: 70 mm
Standard band: 0,7 mm x 16 mm, length 3200 mm
Band speed: 200 – 3000 m/min
Band tension: 10.000 N
Drive: Three-phase current motor 2200 W
Weight: 550 kg
zeichnung-diamantbandsaege-bs-400-fy-maschine-mit-massen
Band cleaning

The band is cleaned by a set of high-pressure spray pipes. Because the saw band is cleaned under high pressure under the work area, the band returns to the cut completely clean.

Coolant system with filter insert

Collecting tray with drain to coolant tank, coolant pump, coolant supply with shut-off valve and articulated pipe, automatic control of coolant system. A filter tissue of around 0.7 x 0.7 m can be inserted and replaced when necessary.

Dramet-BS400-F-FY_E