Project Description
The Diamond band saw BS200 S is an economically efficient laboratory machine with a fixed sawing unit
Passage (length, width) 200×200 mm, cutting length (X-axis) 200 mm. Floor space 800 x 714 mm, 1858 mm hight.
The Diamond band saw BS200 S has a sliding table that can be manually moved while sawing. During operation the sliding table can also be moved by its own weight.
In terms of sawing different thicknesses, the machine can be easily adjusted. Slice thickness can be verified by using the manual lock.
The Diamond band saw can be operated with a dry cut or alternatively with cooling. Under specific conditions a cooling creates more effective cuttings combined with higher rotational speeds and higher feed rates.
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
The Diamond band saw BS200 S cuts various substrates
- Optical glass cutting with diamond band sawsMarco Ripanti2019-05-17T16:08:08+00:00
Optical glass cutting with diamond band saws
- Graphite sawing with diamond band sawsMarco Ripanti2019-05-09T15:06:30+00:00
Graphite sawing with diamond band saws
- GRP materials sawing with diamond band sawsMarco Ripanti2019-05-17T16:15:58+00:00
GRP materials sawing with diamond band saws
- Sawing industrial ceramics with diamond band sawsMarco Ripanti2019-05-17T16:20:19+00:00
Sawing industrial ceramics with diamond band saws
- Technical ceramic machining with diamond band sawsMarco Ripanti2019-05-17T16:26:16+00:00
Technical ceramic machining with diamond band saws
- Pathology Saw with diamond band sawMarco Ripanti2019-05-17T16:33:39+00:00
Pathology Saw with diamond band saw
More technical details concerning the Diamond band saw BS200 S
The BS200 S is composed of a band unit with two deflection rollers D = 230 mm with a passage (H x W) of 200 x 200 mm. The diamond saw band runs over two rollers in an endless loop. It is driven and pneumatically tensioned by the height-adjustable upper roller. The band is driven by a 750 W 3-phase current motor controlled by a frequency transformer. The band tension is set by the adjustable air pressure on the pressure reducer. The speed of the band can be set between 200 and 2200 m/min.
The workpiece table´s linear guidance can be tilted using an adjustment screw. The table moves with a constant feed force driven by its own weight without the need for manual operation.
It can be operated with a dry cut or alternatively with cooling. For dry cutting, a suction unit is attached to the exhaust connector provided. For the stainless version, pure water can be used for cooling.
The workpiece table´s linear guidance can be tilted using an adjustment screw. The table moves with a constant feed force driven by its own weight without the need for manual operation.
It can be operated with a dry cut or alternatively with cooling. For dry cutting, a suction unit is attached to the exhaust connector provided. For the stainless version, pure water can be used for cooling.
| Technical data | Description |
|---|---|
| Length: | 800 mm |
| Width: | 714 mm |
| Height: | 1858 mm |
| Passage: | 200 mm x 200 mm |
| Travel (X, Y): | 220 mm, 210 mm |
| Deflection roller diameter Ø: | 230 mm |
| Guide roller diameter Ø: | 47 mm |
| Standard band: | 0,7 mm x 8 mm, length 1870 mm |
| Band speed: | 200 – 2200 m/min |
| Band tension: | 2.000 N |
| Drive: | Three-phase current motor 750 W |
| Weight: | 110 kg |
