[Englisch]
Diamond band saw DS750 NC2018-05-17T15:35:02+00:00

Project Description

The diamond parting-off grinder DS750 NC is a modern production machine

The diamond wire saw DS750 NC is ideal for the cutting of 2D contours

Passage (H) is 120 mm, travel work area is 400 x 300 mm (X axis, Y axis)

The diamond wire saw DS750 NC is a diamond parting-off grinder which lends itself ideally for the cutting of 2D contours.
The ball screws used for the feed allow the pre-programmed contour to be followed with high precision. The process of programming the workpiece contour with external CAD programs is supported by such features as automatic tool radius correction, automatic closure of the contour and the graphic display and process simulation.

The diamond wire saw DS750 NC saws 2D contours in a variety of materials

More technical details concerning the Diamond wire saw DS750 NC

The workpiece can be processed on two axes with any interpolation. The wire is driven by a four-phase current motor controlled by a frequency transformer. The speed of the wire can be set at any point between 100 and 3000 m/min. To insert and tension the wire, the drive motor and the drive roller are moved with a pneumatic cylinder. The wire tension is set by the adjustable air pressure on the pressure reducer.

The process of programming the workpiece contour with external CAD programs is supported by such features as automatic tool radius correction, automatic closure of the contour and the graphic display and process simulation. Precision in following the contour is ensured by ball screws, which achieve an optimum result in combination with the automatic delay in movement when radii are being processed.

The dust is extracted directly under the work area. The sawdust is pulled down by the wire and then directly extracted.

Wire speed:100 – 3000 m/min

Technical data Description
Lenght: 1385 mm
Width: 1005 mm
Height: 1330 mm
Passage: 120 mm x 400 mm
Work area (X axis, Y axis): 400 mm, 300 mm
Axes of rotation: 150 mm
Sawing wire: Ø 0,7 – 1,2 mm, Length 1870 mm
Drive: Three-phase current motor 750 W
Weight: 200 kg
Drahtsäge Maschine DS750 NC
Dramet DS750-NC

We use Cookies

Our website uses cookies.
However, your IP address is coded in our evaluation so that we are not able to draw any conclusions about you personally.
We wish to understand our users in order to continuously improve our website. We are able to do this only if we know our visitors' behavior on the website. For this reason we use Google Analytics.

Do you agree?

If you are not in agreement with this, then you can block the installation of cookies through the appropriate setting in your browser software.
[Englisch]